This Door Station features 2MP high-definition camera capabilities, PoE, as well as noise suppression and echo cancellation for use in low illumination environments. The DS-KV8113-WME1 boasts access control functions and a tamper-proof design, allowing for remote configuration via 2.4 GHz Wi-Fi and offering up to IK08 protection level.
This door station comes in two application options FLUSH or SURFACE.
Key Features
- Standard PoE
-
2MP HD camera
- Noise suppression and echo cancellation
- Low illumination
- Access control functions
-
Tamper-proof
- Configuration remotely via Web
- 2.4 GHz Wi-Fi
- Protection level: IP65/ IK08
Works with any Gen2 Room Stations.
Wiring Requirements
- Ethernet cable from Door Station to Poe Switch
- Ethernet cable from the indoor Monitor to Poe Switch
- Ethernet cable Poe Switch to the modem (if you wish to set up remote communication)
Instructions
Issue Card via Main (Master) Card: You can swipe card to issue it after swiping the main card in advance.
Steps
- Swipe the main (master) card on the card reading area, and hear two beeps.
- Swipe the unauthorized sub cards in turn after hearing a beep.
- Swipe the main card again to end the card issuing process.
You must keep the master card safe
- Choosing a selection results in a full page refresh.